Results 1 - 24 of 65
_250x250.jpg)
_250x250.jpg)
Drum dryer SWISS COMBI YC 1994-2015
Drum dryer for wood shavings SWISSCOMBI
Vaporisation to 12 t / hrs
Length approx. 12 m, diameters 4 m
3 train dryer
YEAR OF CONSTRUCTION dryer in 1994
YEAR OF CONSTRUCTION cyclones in 2015
with frequency convertor
Without switch cupboard
_250x250.jpg)
Hammermill PALLMANN PHMS 18-20, YC 2002
Rotor length 2000 mm
Rotor diameter 1800 mm
Achievement approx. 17 atro / H
Engine 630 kW with 690 V
4 sentences of sieves: 6, 8, 10 and 12 mm of punching
Weight hammer mill 16.5 Tonn
Weight Motos 4.6 Tonn
Mechanization for planing line multi-blade saw HIT YC 2014
Mechanization for planer, multi-blade saw
Wood length up to 8 meters
Consists:
Cross conveyor for packages
destacker
cross conveyor
Magazine with accelerator, feed up to 50 m / min
Roller table after the planing machine
cross conveyor
Joinery Machine Hundegger K2, YC 1999
Joinery machine K2i
1. 5 strands, task transverse conveyor
2. Undertable pivoting saw
3. universal mill
4. Combi support for horizontally working tools
5. Combi support for vertically working tools
6. Drill units
7. Vertical end mill
8. Universal slot cutter
9. Markers 2 ps
10. fully automatic beam turning station
11. Transport and positioning facility
12. ...
Complete laminated timber lines KEMPF, REX, DIMTER, WOOD EYE, EISSELE, YC 2008
Complete laminated timber lines KEMPF, REX, DIMTER, WOOD EYE, EISSELE, YC 2008
Max. length of the wood: 12 m
Max. work piece width by finger jointing line: 210 mm
Board length at the entrance: max. 4,5 m
Work piece length by finger jointing line, cut: 20 - 150 cm
Optimisation with WOOD EYE scanner arrangement
Input width in the press: max. 400 mm
_250x250.jpg)
Chipper canter line with profiler LINCK, YC 1985
Technical details:
log diameter 10-34 cm
sideboards 4 pc.
Log length 3 - 6 m
Infeed speed 57 m/min
Chipper canter Linck V 30
Chipper canter Linck V 25
Profiler Linck VPS 22
Profiler Linck VP 22
Multiripsaw Linck MK 20D1
Conveyors for waste, sieve Rudnick Enners
Thermal oil boiler VAS Turboden, YC 2003, overhaul 2016
Boiler plant VAS 4.2 MW
ash slide
2 trough chain conveyors
MAXXTEC heater
ORC electrical maximum power 700 kW Turbine T600
Electric cabinets with PLC control
Safety heat exchanger
Thermal oil pumps
cooler
diesel pumps
collection tank
surge tank
Economizer
heat recovery in a thermal oil heat exchanger
_250x250.jpg)
Profiling and chipping equipment Linck ValonKone Ahlstrom Heinola Bruks
Profiling and chipping equipment : Linck, ValonKone, Ahlstrom, Heinola, Bruks
YEAR 1996-2007 annual capacity 500,000 m ³/year
log- length 2.5-6.3 m
log diameter 10-60 m
Lateral boards per master max: 8
Feed speed: 40-105 m / min, frequency controlled
Sort boxes: 50
lumber package size 2 (width) x 4.8 (elevation) meters
_250x250.jpg)
Planing machine LMC Planermac 6755, 6 spindles, YC 2009
Spindle:
1. Horizontal-bottom 22 KW
2. Vertical-left 15 KW
3. Vertical right 15 KW
4. Horizontal-top 22 KW
5. Horizontal-top 22 KW
6. Horizontal-bottom 22 KW
Technical specifications:
Working width 755 mm
Working height 180 mm
Feed motor 15 KW
Feed rate up to 36 m / min
Connection 50 Hz 380 V
Spindle diameter 50 mm
_250x250.jpg)
_250x250.jpg)
Cutting for timber packs CMS MI 120 EL, YC 1997
Max. Package size:
Width 1200 mm
Height 1200 mm
Length 6.5 meters
Powered roller conveyor
Electronically adjustable stop sword saw
Flat conveyor belt for disposal
Transport conveyor for disposal high suction
_250x250.jpg)
Planer for building timber Kupfermühle VUIN PLUS 600, YC 1990
Specifications:
Working width 600 mm
Working height 250 mm (2 sided processing)
Working height 200 mm (4 sided processing)
Number of spindles 5
Spindle location: bottom-top - r + l -bottom
Top blade shaft 11 kW
Bottom blade shaft 15 kW
right knife shaft 11kW
Left knife shaft 11 kW
Additional shaft 11 kW
Feed speed 5 - 30 m / min
Feed Motor 4.0 kW
Feed the power ...
_250x250.jpg)
Gate Möhringer 700, BJ 2006
Gate Möhringer 700, BJ 2006
With fast feeder
Lifting height 700 mm
feed up to 24 m / min
Main motor 160 kW
block trains + drop
Cabin with control
Splitting wedge with chain extension
Gate roller table with cross conveyor for main product and cross conveyor for side goods
hydraulic
Control cabinet, control Siemens S7
Planing line WACO DOMINANT YC 1989/2004/2012
Technical specifications:
10 spindles:
3 down, 3 above, 2 right, 2 left
Feed rate 30 - 200 m / min
Sound insulating cabinet
Containment Cap
Tool
_250x250.jpg)
Edge banding machine BRANDT KD 66, YC 1999
Workpiece width of min. 65 mm
Workpiece length of min. 160 mm
Workpiece height min-max 8-40 mm
Edge thickness min-max 0,4-8 mm
Feed 11 m / min
Fixed stop at right
Glue specification glue roll
Hot melt gluing unit
Edge magazine roll 3 mm
Edge magazine Strip edge magazine solid 8 mm
Pressure zone straight
Caps chamfer straight
Chamfer/RADIUS milling: 1 per page
Profile scraper: ...
_250x250.jpg)
Двухсторонний фрезерный станок CELASHI
Двигателя на CELASHI:
Подрезые пилы 1,5 кВт
Верхний шпиндель 4 кВт 3000/6000 об/мин
Диаметр 35 мм
Длина шпиндели 62 мм
Диаметр инструмента макс. 250 мм
Нижний шпиндель 4 кВт 3000/6000 об/мин
Диаметр 35 мм
Длина шпинделя 62 мм
Диаметр инструмента макс. 250 мм
Профилирующий шпиндель 5,5 кВт 3000/6000 об/мин
Диаметр инструмента макс. 250 мм
Длина ...
_250x250.jpg)
Block gluing press for BSH, YC 2008
Hydraulic, 2 blocks, separately controllable
Maximum gluing length 13500 mm
-Gluing width 400 mm
min.-gluing width 105 mm
17 cylinder
Automatic pressure setting
_250x250.jpg)
Film wrapping machine with shrink tunnel Sotemapack Totalpack 50 YC 2000
Film wrapping machine with shrink tunnel Sotemapack Totalpack, Made in Italy
Packaging unit:
Max width 300 mm
Min length 800 mm
Min. height 18 mm
Max height 250 mm
PE film 40-80 my
Roll of film with Max width 350 mm
Drum chipper Drevostroj SDOP 600/3, YC 2015
Chipper plantage consists of:
1. Drum chipper Drevostroj SDOP 600/3
2. Vibrating chute
3. Scraper conveyor for the chips
4. Chip distributor for Containers
5. Control cabinet and control panel
Canter line Drevostroj, 2007 YC
Only canter, without multiripsaw (can be installed)
Work in round with one canter.
Log diameter 12 – 28 cm
Log length 2,5 – 4 m
Infeed speed 35 m/min
Electrical power 120 kW
_250x250.jpg)
Plant for the production of wood pellets Amandus Kahl, overhauled
Plant for the production of wood pellets Amandus Kahl, overhauled
Power up to 800 kg / h
_250x250.jpg)
Equipment, for producing and laminating of plywood, format 1200 x 2400 mm, 2016 YC
Equipment, for producing and laminating of plywood, format 4 x 8 feet, (1200 x 2400 mm) 2016 Y.C.
Capacity: 1200 m³/ month in 3 shift in plywood, 3000 v³ in laminating.
Materials: dreyed veneer (a part of veneer can be row and dreyed in dreyer)
Woodworking machinery
and equipment from Europe
Contacts
- 32107 - Deutschland
- Bad Salzuflen - Kriegerheide 2b
- +49 (521) 8972 7580
- +49 (521) 8972 7589
- info@bautex.net