Machine search
Results 10 - 18 of 28
Used woodworking machines
_250x250.jpg)
Chipper canter saw combination WD FR18 YC 1985
Complete arrangement from module separation
cross conveyor with cut saw
Centring WD H80
Chipper canter saw combination WD FR18
2 chipper unit 75 kW
Chipper disk distance 48 – 380 mm
1 centrl cut saw
2 x saw waves 75 kW
Automatic adjustment of chipper disk, saw waves
Feed speeds 37 and 75 m / min
2 powered roller conveyor with laying
Flume vibrated under the ...
_250x250.jpg)
Log crosscut saw Crosscut saw HOLTEC HQKS YC 1986
Round log crosscut saw Holtec type HQKS BJ 1986
Circular Saw
Main engine 37 kW
With conveyor belt in front of the saw approx. 20 meters
Conveyor belt with stops after the saw
Hydraulic station, electrical system
Chipper canter profiling line LINCK VM45/V30, YC 1990-2005
wood length 3 - 5,3 m
round spar diameter 10 - 50 cm
Feed 30 and 60 m/min
Maximum 8 side boards per log
Consists of :
- Log feeder with separating stop
- Block train with measurement
- Log turning device
- Pull-in turning device LINCK
- Chipper 1: LINCK VM 45, year 2005
- Chipper 2: Linck V 30
- 2 profiling trimming unit LINCK VPP 34
- 2 sawing unit for cutting trimmed side boards ...
_250x250.jpg)
_250x250.jpg)
Hammermill PALLMANN PHMS 18-20, YC 2002
Rotor length 2000 mm
Rotor diameter 1800 mm
Achievement approx. 17 atro / H
Engine 630 kW with 690 V
4 sentences of sieves: 6, 8, 10 and 12 mm of punching
Weight hammer mill 16.5 Tonn
Weight Motos 4.6 Tonn
Joinery Machine Hundegger K2, YC 1999
Joinery machine K2i
1. 5 strands, task transverse conveyor
2. Undertable pivoting saw
3. universal mill
4. Combi support for horizontally working tools
5. Combi support for vertically working tools
6. Drill units
7. Vertical end mill
8. Universal slot cutter
9. Markers 2 ps
10. fully automatic beam turning station
11. Transport and positioning facility
12. ...
_250x250.jpg)
Profiling and chipping equipment Linck ValonKone Ahlstrom Heinola Bruks
Profiling and chipping equipment : Linck, ValonKone, Ahlstrom, Heinola, Bruks
YEAR 1996-2007 annual capacity 500,000 m ³/year
log- length 2.5-6.3 m
log diameter 10-60 m
Lateral boards per master max: 8
Feed speed: 40-105 m / min, frequency controlled
Sort boxes: 50
lumber package size 2 (width) x 4.8 (elevation) meters
_250x250.jpg)
Planing machine LMC Planermac 6755, 6 spindles, YC 2009
Spindle:
1. Horizontal-bottom 22 KW
2. Vertical-left 15 KW
3. Vertical right 15 KW
4. Horizontal-top 22 KW
5. Horizontal-top 22 KW
6. Horizontal-bottom 22 KW
Technical specifications:
Working width 755 mm
Working height 180 mm
Feed motor 15 KW
Feed rate up to 36 m / min
Connection 50 Hz 380 V
Spindle diameter 50 mm
_250x250.jpg)
Gate Möhringer 700, BJ 2006
Gate Möhringer 700, BJ 2006
With fast feeder
Lifting height 700 mm
feed up to 24 m / min
Main motor 160 kW
block trains + drop
Cabin with control
Splitting wedge with chain extension
Gate roller table with cross conveyor for main product and cross conveyor for side goods
hydraulic
Control cabinet, control Siemens S7
Woodworking machinery
and equipment from Europe
Contacts
- 32107 - Deutschland
- Bad Salzuflen - Kriegerheide 2b
- +49 (0) 5222-798100
- info@bautex.net